[Subject Prev][Subject Next][Thread Prev][Thread Next][Subject Index][Thread Index]

[LI] RErrors On Red-Hat Linux 6.1



Hi ! every body.
I have just found a problem with Rdhat 6.1.
May be it is not a error atall.
I used to have a three linux machines.
One used to act as a internet gateway for the other two.
On  the other two machines  i had configured it in the following way
{
 route add -host 192.168.42.5 dev eth0
 route add default gw 192.168.42.5 dev eth0
}
And on ther server it was configured to take resourses from the VSNL
It was configured in the following way.
{
 i added an ppp interface "ppp0"
route add default gw 202.54.1.18 dev ppp0

     }

And the other two machine were easil avalaibel on the net.
They could do telnet and ftp from that machines.
Now i have reinstalled that server with Redhat 6.1 pcquest.
The squid does not work it gives a "Access Denied " error message.
I have  to run squid as a Http - accelarator .
Secondly.
The other machines have access to internet thru proxy specification .
But even though i have route added the Red-Hat 6.1 machine as the routing
default gateway.
I can not ftp or telnet from those machines.
As if 6.1 is unable to route .
is there any thing i have missed ifd so please help.




--------------02B66AAE5FD01644CBFF16F2
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">

Hi ! every body.
I have just found a problem with Rdhat 6.1.
May be it is not a error atall.
I used to have a three linux machines.
One used to act as a internet gateway for the other two.
On  the other two machines  i had configured it in the following way
{
 route add -host 192.168.42.5 dev eth0
 route add default gw 192.168.42.5 dev eth0
}
And on ther server it was configured to take resourses from the VSNL
It was configured in the following way.
{
 i added an ppp interface "ppp0"
route add default gw 202.54.1.18 dev ppp0

      }

And the other two machine were easil avalaibel on the net.
They could do telnet and ftp from that machines.
Now i have reinstalled that server with Redhat 6.1 pcquest.
The squid does not work it gives a "Access Denied " error message.
I have  to run squid as a Http - accelarator .
Secondly.
The other machines have access to internet thru proxy specification .
But even though i have route added the Red-Hat 6.1 machine as the routing
default
gateway.
I can not ftp or telnet from those machines.
As if 6.1 is unable to route .
is there any thing i have missed ifd so please help.



--------------------------------------------------------------------
The Linux India Mailing List Archives are now available.  Please search
the archive at http://lists.linux-india.org/ before posting your question
to avoid repetition and save bandwidth.