Xserver problem

[kamesh jayachandran <kameshj@xxxxxxxxxxxxxxx>]

Hello chennai luggies,Here I face a strange problem with Xserver.The Xserver 
works fine with resolution 640*480 with depth 24 bits.But when I shutdown the 
Xserver and start it again after some time ,it prompts the following error 
message.If I reboot the linux machine Xserver starts without any problem.Any 
help is appreciated.Thanks in advance.With regards kamesh jayachandran.I affix 
the error message bellow.
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
      RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
      GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
      sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630,
      sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
      i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
      generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Intel Corporation|82810 CGC [Chipset Graphics 
Controller]"
(**) SVGA: Monitor ID: "My Monitor"
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi"
(--) SVGA: PCI: Intel Unknown chipset (0x7121) rev 3, Memory @ 0xd0000000, 
0xd4100000
X connection to :0.0 broken (explicit kill or server shutdown).

kamesh jayachandran
SoftWare Engineer 
PlanetAsia.com
Bangalore
See my work at www.electricalmachine.com

---
Visit our home page at: www.chennailug.org
Send e-mail to 'ilugc-request@xxxxxxxxxxxxxxxxxx' with 'unsubscribe' 
in either the subject or the body to unsubscribe from this list.