[Subject Prev][Subject Next][Thread Prev][Thread Next][Subject Index][Thread Index]
Re: Trouble with XF 3.3.6
Dear Mr Gopinath,
Already done that. See - it worked for RH 6.1, but I have lost X once I
upgraded to Red HAt 6.2. Seems to be some problem with the agpgart.o module
which is not allocating memory for X.
Thanks for your help anyway, but the Intel bit I have already tried.
Ashwin
----- Original Message -----
From: "S.Gopinath" <sxg@xxxxxxxxx>
To: <ilugc@xxxxxxxxxxxxxxxxxx>
Sent: Tuesday, June 06, 2000 12:59 PM
Subject: Re: Trouble with XF 3.3.6
> Dear Mr.Ashwin,
>
> Sorry that I have not read your mail all carefully. But I recently
> configured X in Caldera 2.2 for a 810E Chip set Motherboard.
> All you have to do is tovisit Intel site and get the Linux drivers and
> README.
> If you could follow the instructions you will succeed. If possible let me
> put those
> drivers in my web site & inform you. Okay ?
> Thanks,
> S.Gopinath
> ----- Original Message -----
> From: Ashwin D <ashwind@xxxxxxxxxxxxx>
> To: Linux User Group <ilugc@xxxxxxxxxxxxxxxxxx>
> Sent: Tuesday, June 06, 2000 9:49 AM
> Subject: Trouble with XF 3.3.6
>
>
> > Dear Sir,
> >
> > Back on windows, hopefully with your help for a short time!!
> > Need your help on configuring X for 810 motherboard. I had little
trouble
> > getting it to run on RH 6.1. Yesterday, I upgraded to 6.2 and its all
> messy
> > now.
> >
> > I have done all the Xconfigurator stuff - I even see the demo of X at
the
> > end. But once I try to startx - the server gets killed with the error
> > message at the bottom. (the last message is:
> >
> > gart allocate: Cannot allocate memory
> > (--) SVGA: GART: allocation of 1024 pages failed at page 0
> >
> > Fatal server error:
> > Aborting)
> >
> > I have also done insmod agpgart.
> >
> > See if you can help. There seems to be some trouble with gart getting
> > memory. Hopefully you have seen this before. Once again - I had no such
> > trouble with RH 6.1 except for separate modules et all - if you cannot
> > figure out wwhats wrong, can u tell me how I can roll back X alone to RH
> > 6.1??
> >
> > Thank you and sorry for the trouble.
> >
> > Ashwin
> >
> > COMPLETE OUTPUT OF SERVER CRASH:
> >
> > XFree86 Version 3.3.6 / X Window System
> > (protocol Version 11, revision 0, vendor release 6300)
> > Release Date: January 8 2000
> > If the server is older than 6-12 months, or if your card is newer
> > than the above date, look for a newer version before reporting
> > problems. (see http://www.XFree86.Org/FAQ)
> > Operating System: Linux 2.2.5-22smp i686 [ELF]
> > Configured drivers:
> > SVGA: server for SVGA graphics adaptors (Patchlevel 1):
> > s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
> > RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
> > GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
> > ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
> > ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
> ET6100,
> > et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
wd90c33,
> > gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
> > sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300,
> sis630,
> > sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
> > tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr,
tgui9400cxi,
> > tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320,
> tgui9660,
> > tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
> > cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985,
> cyber9397dvd,
> > blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426,
> clgd5428,
> > clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
> clgd5462,
> > clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
> clgd7541,
> > clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22,
> ncr77c22e,
> > cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
> > mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101,
ali2228,
> > ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420,
cl6440,
> > video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
> > s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093,
> NM2097,
> > NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540,
> ct65545,
> > ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
> > ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110,
> i740,
> > i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
> > generic
> > (using VT number 7)
> >
> > XF86Config: /usr/X11R6/lib/X11/XF86Config
> > (**) stands for supplied, (--) stands for probed/default values
> > (**) XKB: keycodes: "xfree86"
> > (**) XKB: types: "default"
> > (**) XKB: compat: "default"
> > (**) XKB: symbols: "us(pc101)"
> > (**) XKB: geometry: "pc"
> > (**) XKB: rules: "xfree86"
> > (**) XKB: model: "pc101"
> > (**) XKB: layout: "us"
> > (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
> > (**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
> > (**) SVGA: Graphics device ID: "Intel Corporation|82810 CGC [Chipset
> > Graphics Controller]"
> > (**) SVGA: Monitor ID: "Generic Multisync"
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> > (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> > (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> > (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> > (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> > (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> > (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> > (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> > Warning: The directory "/usr/X11R6/lib/X11/fonts/TrueType" does not
exist.
> > Entry deleted from font path.
> > (**) FontPath set to "unix/:-1"
> > (--) SVGA: PCI: Intel Unknown chipset (0x7121) rev 3, Memory @
0xd8000000,
> > 0xdc000000
> > gart allocate: Cannot allocate memory
> > (--) SVGA: GART: allocation of 1024 pages failed at page 0
> >
> > Fatal server error:
> > Aborting
> >
> > When reporting a problem related to a server crash, please send
> > the full server output, not just the last messages
> >
> > X connection to :0.0 broken (explicit kill or server shutdown).
> >
> >
> > ---
> > Send e-mail to 'ilugc-request@xxxxxxxxxxxxxxxxxx' with 'unsubscribe'
> > in either the subject or the body to unsubscribe from this list.
> >
> >
>
> ---
> Send e-mail to 'ilugc-request@xxxxxxxxxxxxxxxxxx' with 'unsubscribe'
> in either the subject or the body to unsubscribe from this list.
---
Send e-mail to 'ilugc-request@xxxxxxxxxxxxxxxxxx' with 'unsubscribe'
in either the subject or the body to unsubscribe from this list.