Re: [LI] Regarding SAMBA server

["Joseph John" <joseph@xxxxxxxxxxxxx>]

Hello
            now I can see the new Linux on the NetWork neihbour hood but can
doble click and access it , it shows this following error
                \\NewLinux
                 The Network Path was not found
                                                          thanks
                                                                Joseph John
> >Hello
> >      I had edited /etc/smb.conf   file  and restarted smb, my NT
> >workstaions can'nt see the Linux machine through the network
neighbourhood,
> >
> >
> >; Please uncomment the following entry and replace the
> >; ip number and netmask with the correct numbers for
> >; your ethernet interface.
> >;   interfaces = 192.168.1.1/255.255.255.0
> >interfaces = 192.168.0.1/255.255.255.0
> ;this is used when u have multiple interfaces and to restrict
> ;samba to one interface only [if u don't have multiple interface
> ;then this can be ignored
> >
>
> if ur NT runs wins server service, this is okay, else change it to yes
> >; If you want Samba to act as a wins server, please set
> >; 'wins support = yes'
> >   wins support = no
> >
>
> if ur NT does not run wins server service, this is okay, else provide the
> NT's IP no
> >; If you want Samba to use an existing wins server,
> >; please uncomment the following line and replace
> >; the dummy with the wins server's ip number.
> >;   wins server = 192.168.1.1
> >
> >[homes]
> >   comment = Homes
> >   browseable = yes        // it should be no
> >   read only = no
> >   create mode = 0750
> >
> >; The following share gives all users access to the Server's CD drive,
> >; assuming it is mounted under /cd. To enable this share, please remove
> >; the semicolons before the lines
> >;
> >[cdrom]
> >   comment = Linux CD-ROM
> >   path = /cdrom        // is this the path where u mount CD ?
> //   browsable = yes  ; give this to view the network share in the NN
system
> folder (WINNT)
> >   read only = yes
> >   locking = no
> >
> >
> >[utils]
> >   comment = Utils for Wincvs
> >   path = /local/utils
> >   read only = yes
> >   valid users = user1 user2 user3 user4 user5 user6 user7
> //   browsable = yes  ; give this to view the network share in the NN
system
> folder (WINNT)
>
>
> try this config
>
> --------------------------------------------------------------------------
--
> ----------
> Jiju Thomas Mathew
> see my jpeg post cards based on linux :
http://digitel.webjump.com/cards.htm
> Linux registered user #154193 -- http://counter.li.org
>
> --------------------------------------------------------------------
> The Linux India Mailing List Archives are now available.  Please search
> the archive at http://lists.linux-india.org/ before posting your question
> to avoid repetition and save bandwidth.
>
>


--------------------------------------------------------------------
The Linux India Mailing List Archives are now available.  Please search
the archive at http://lists.linux-india.org/ before posting your question
to avoid repetition and save bandwidth.